Error when restoring database

Hi guys!
I wonder if this happened to you... I searched and found nothing related to this problem...
When I try to restore a database in SQL Server Management Studio on a 2005 database engine I receive the message:

Cannot show requested dialog.

ADDITIONAL INFORMATION:

Could not load file or assembly 'SqlManagerUI, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A) (mscorlib)

Strong name validation failed. (Exception from HRESULT: 0x8013141A)

Sometimes I receive the same error when starting Management Studio for the connection dialog...

Thank you!

This error means that one or more of the SQL DLL's has been corrupted such that the binary data in the file no longer matches the file that was signed by Microsoft.

Most common causes of this kind of corruption:

1) Viruses or other malware
2) File system corruption
3) Failing hard drive|||I'm seeing this error too. I a reinstall indicated?|||

I have got the same ERROR message too.

Configuration:
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft .NET Framework 2.0.50727.42
Hardware Disk Drive HTS721080G9SA00

bg,
Selim

|||

Try rerunning the setup and repair all the components (Dont chose for a custom install)
Hope this helps.

Thanks,
Kuntal

|||Have you tried to accessing the same from another client's machine?|||

I have reinstalled Win XP Pro, then installed SQL 2005 Developer Edition + SP1
and now works fine :)

thnx,
Selim

|||Oh if you think that was easy then so be it, if it occurs next time then make sure to check.

Error when restoring database

Hi guys!
I wonder if this happened to you... I searched and found nothing related to this problem...
When I try to restore a database in SQL Server Management Studio on a 2005 database engine I receive the message:

Cannot show requested dialog.

ADDITIONAL INFORMATION:

Could not load file or assembly 'SqlManagerUI, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A) (mscorlib)

Strong name validation failed. (Exception from HRESULT: 0x8013141A)

Sometimes I receive the same error when starting Management Studio for the connection dialog...

Thank you!

This error means that one or more of the SQL DLL's has been corrupted such that the binary data in the file no longer matches the file that was signed by Microsoft.

Most common causes of this kind of corruption:

1) Viruses or other malware
2) File system corruption
3) Failing hard drive|||I'm seeing this error too. I a reinstall indicated?|||

I have got the same ERROR message too.

Configuration:
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft .NET Framework 2.0.50727.42
Hardware Disk Drive HTS721080G9SA00

bg,
Selim

|||

Try rerunning the setup and repair all the components (Dont chose for a custom install)
Hope this helps.

Thanks,
Kuntal

|||Have you tried to accessing the same from another client's machine?|||

I have reinstalled Win XP Pro, then installed SQL 2005 Developer Edition + SP1
and now works fine :)

thnx,
Selim

|||Oh if you think that was easy then so be it, if it occurs next time then make sure to check.

Error when installing

Iv'e searched other forums and websites for this, but I cant solve it.

When I try to install SQL 2000 I get an error about Low Registry Quota.

Any idea on how to solve this?

Doing a quick search, I found this suggestion which helped a few people fix this problem. Can you check if this might be your problem?

Thanks,
Sam

<snip>

I have never ever had the following error message before during the
installation of SQL Server Developer Edition 2000 on a client running
Windows XP Pro SP2 using an account with administrator privileges:
"An error occurred while creating one or more registry entries. Please see
C:\Windows\sqlstp.log for details. The problem could be caused by a low
registry quota condition."

Looking on the internet I have only found several people who had the same
problem but nobody gave a solution. What I have done to find the cause for
this problem was to run the Registry Monitor tool which can be found on
sysinternals.com to monitor what was causing this "Registry error".

I saw that I got several access denies to the following registry key:
HKEY_CLASSES_ROOT\.col

In RegEdit I noticed that the permissions for this key were set to
read-only. I have changed this for the Administrator to full-control and the
installation of SQL Server worked fine.

</snip>

|||Yeah, Iv'e tried that one already. Ill try it again. Thanks :)|||Didnt work :'(

Error Violation of Primary Key While Attaching Database

Hello all,
I have been trying to attach a database but it fails because of
duplicate rows (Error 2627).
I searched in the Internet for removing duplicate records but it can
only work if I manage to attach the database first (correct me if I'm
wrong). So without having the database attached to the SQL server, I
will not manage to remove the duplicate rows. But when I tried to
attach, it checks for duplicate records automatically and fail to
attach.
Is there any workaround for my case?
Thanks in advance.
Regards,
Garreth Goh
BTW, it is SQL 2000 with SP3.
Regards,
Garreth Goh
On Dec 18, 10:02 am, gohtiamt...@.gmail.com wrote:
> Hello all,
> I have been trying to attach a database but it fails because of
> duplicate rows (Error 2627).
> I searched in the Internet for removing duplicate records but it can
> only work if I manage to attach the database first (correct me if I'm
> wrong). So without having the database attached to the SQL server, I
> will not manage to remove the duplicate rows. But when I tried to
> attach, it checks for duplicate records automatically and fail to
> attach.
> Is there any workaround for my case?
> Thanks in advance.
> Regards,
> Garreth Goh
|||Hi,
More updates after several attempts (with separate SQL server 2000
SP4).
01. I move the MDF and LDF files to another folders. I have two MDF
and two LDF files for one database.
02. I attach the same but blank backup database to my SQL server with
a new database name.
03. Back it up.
04. Restore the backup with the original database name in the initial
folder where the corrupted files were.
05. Detach the new restored (but empty) database.
06. Move the new created MDF and LDF files to another folder.
07. Copy the original corrupted MDF and LDF files back to the original
folder.
08. Attach the database. Got "Suspect" message.
09. Update "sysdatabases" to set the database into Emergency Mode.
10. Attach the database back. I got Emergency Mode.
11. Run "DBCC CHECKDB WITH NO_INFOMSGS" tells me to do
"REPAIR_ALLOW_DATA_LOSS".
12. Stop SQL services and run in Command Prompt "SQLSERVR -c -m" cause
it tells me to have Single-User mode when trying to run "DBCC
CHECKDB ...REPAIR_ALLOW_DATA_LOSS".
13. When I try to run "DBCC CHECKDB ...REPAIR_ALLOW_DATA_LOSS" in
this Single-Mode, it tells me "Could not run BEGIN TRANSACTION in
database 'MyDB' because the database is in bypass recovery mode."
I am stuck here. Could anyone here help, please?
I may have incorrectly listed down the sequence from point 8 to 11 but
my current status is at point 13.
Regards,
Garreth Goh
On Dec 18, 10:58 am, gohtiamt...@.gmail.com wrote:
> BTW, it is SQL 2000 with SP3.
> Regards,
> Garreth Goh
|||Or get Microsoft Technical Support on the phone.
Kevin G. Boles
TheSQLGuru
Indicium Resources, Inc.
kgboles a earthlink dt net
"Tibor Karaszi" <tibor_please.no.email_karaszi@.hotmail.nomail.com> wrote in
message news:261F6FD2-B073-42F2-A218-B3B6AFE3750D@.microsoft.com...
> The error pretty much speak for itself. My guess is that you have to try
> to export the data to a clean database, using some combination of script
> objects (unless you have DDL files to re-create them) and for the data
> SELECT INTO., INSERT SELECT, BCP etc.
> I would bring in an expert if above doesn't feel comfortable to you...
> --
> Tibor Karaszi, SQL Server MVP
> http://www.karaszi.com/sqlserver/default.asp
> http://sqlblog.com/blogs/tibor_karaszi
>
> <gohtiamtjai@.gmail.com> wrote in message
> news:078e33bc-1d03-4d24-a65b-96367d382dde@.a35g2000prf.googlegroups.com...
>

Error Violation of Primary Key While Attaching Database

Hello all,
I have been trying to attach a database but it fails because of
duplicate rows (Error 2627).
I searched in the Internet for removing duplicate records but it can
only work if I manage to attach the database first (correct me if I'm
wrong). So without having the database attached to the SQL server, I
will not manage to remove the duplicate rows. But when I tried to
attach, it checks for duplicate records automatically and fail to
attach.
Is there any workaround for my case?
Thanks in advance.
Regards,
Garreth GohBTW, it is SQL 2000 with SP3.
Regards,
Garreth Goh
On Dec 18, 10:02 am, gohtiamt...@.gmail.com wrote:
> Hello all,
> I have been trying to attach a database but it fails because of
> duplicate rows (Error 2627).
> I searched in the Internet for removing duplicate records but it can
> only work if I manage to attach the database first (correct me if I'm
> wrong). So without having the database attached to the SQL server, I
> will not manage to remove the duplicate rows. But when I tried to
> attach, it checks for duplicate records automatically and fail to
> attach.
> Is there any workaround for my case?
> Thanks in advance.
> Regards,
> Garreth Goh|||Hi,
More updates after several attempts (with separate SQL server 2000
SP4).
01. I move the MDF and LDF files to another folders. I have two MDF
and two LDF files for one database.
02. I attach the same but blank backup database to my SQL server with
a new database name.
03. Back it up.
04. Restore the backup with the original database name in the initial
folder where the corrupted files were.
05. Detach the new restored (but empty) database.
06. Move the new created MDF and LDF files to another folder.
07. Copy the original corrupted MDF and LDF files back to the original
folder.
08. Attach the database. Got "Suspect" message.
09. Update "sysdatabases" to set the database into Emergency Mode.
10. Attach the database back. I got Emergency Mode.
11. Run "DBCC CHECKDB WITH NO_INFOMSGS" tells me to do
"REPAIR_ALLOW_DATA_LOSS".
12. Stop SQL services and run in Command Prompt "SQLSERVR -c -m" cause
it tells me to have Single-User mode when trying to run "DBCC
CHECKDB ...REPAIR_ALLOW_DATA_LOSS".
13. When I try to run "DBCC CHECKDB ...REPAIR_ALLOW_DATA_LOSS" in
this Single-Mode, it tells me "Could not run BEGIN TRANSACTION in
database 'MyDB' because the database is in bypass recovery mode."
I am stuck here. Could anyone here help, please?
I may have incorrectly listed down the sequence from point 8 to 11 but
my current status is at point 13.
Regards,
Garreth Goh
On Dec 18, 10:58 am, gohtiamt...@.gmail.com wrote:
> BTW, it is SQL 2000 with SP3.
> Regards,
> Garreth Goh|||The error pretty much speak for itself. My guess is that you have to try to
export the data to a
clean database, using some combination of script objects (unless you have DD
L files to re-create
them) and for the data SELECT INTO., INSERT SELECT, BCP etc.
I would bring in an expert if above doesn't feel comfortable to you...
Tibor Karaszi, SQL Server MVP
http://www.karaszi.com/sqlserver/default.asp
http://sqlblog.com/blogs/tibor_karaszi
<gohtiamtjai@.gmail.com> wrote in message
news:078e33bc-1d03-4d24-a65b-96367d382dde@.a35g2000prf.googlegroups.com...[vbcol=seagreen]
> Hi,
> More updates after several attempts (with separate SQL server 2000
> SP4).
> 01. I move the MDF and LDF files to another folders. I have two MDF
> and two LDF files for one database.
> 02. I attach the same but blank backup database to my SQL server with
> a new database name.
> 03. Back it up.
> 04. Restore the backup with the original database name in the initial
> folder where the corrupted files were.
> 05. Detach the new restored (but empty) database.
> 06. Move the new created MDF and LDF files to another folder.
> 07. Copy the original corrupted MDF and LDF files back to the original
> folder.
> 08. Attach the database. Got "Suspect" message.
> 09. Update "sysdatabases" to set the database into Emergency Mode.
> 10. Attach the database back. I got Emergency Mode.
> 11. Run "DBCC CHECKDB WITH NO_INFOMSGS" tells me to do
> "REPAIR_ALLOW_DATA_LOSS".
> 12. Stop SQL services and run in Command Prompt "SQLSERVR -c -m" cause
> it tells me to have Single-User mode when trying to run "DBCC
> CHECKDB ...REPAIR_ALLOW_DATA_LOSS".
> 13. When I try to run "DBCC CHECKDB ...REPAIR_ALLOW_DATA_LOSS" in
> this Single-Mode, it tells me "Could not run BEGIN TRANSACTION in
> database 'MyDB' because the database is in bypass recovery mode."
> I am stuck here. Could anyone here help, please?
> I may have incorrectly listed down the sequence from point 8 to 11 but
> my current status is at point 13.
>
> Regards,
> Garreth Goh
>
> On Dec 18, 10:58 am, gohtiamt...@.gmail.com wrote:|||Or get Microsoft Technical Support on the phone.
Kevin G. Boles
TheSQLGuru
Indicium Resources, Inc.
kgboles a earthlink dt net
"Tibor Karaszi" <tibor_please.no.email_karaszi@.hotmail.nomail.com> wrote in
message news:261F6FD2-B073-42F2-A218-B3B6AFE3750D@.microsoft.com...
> The error pretty much speak for itself. My guess is that you have to try
> to export the data to a clean database, using some combination of script
> objects (unless you have DDL files to re-create them) and for the data
> SELECT INTO., INSERT SELECT, BCP etc.
> I would bring in an expert if above doesn't feel comfortable to you...
> --
> Tibor Karaszi, SQL Server MVP
> http://www.karaszi.com/sqlserver/default.asp
> http://sqlblog.com/blogs/tibor_karaszi
>
> <gohtiamtjai@.gmail.com> wrote in message
> news:078e33bc-1d03-4d24-a65b-96367d382dde@.a35g2000prf.googlegroups.com...
>

Error Violation of Primary Key While Attaching Database

Hello all,
I have been trying to attach a database but it fails because of
duplicate rows (Error 2627).
I searched in the Internet for removing duplicate records but it can
only work if I manage to attach the database first (correct me if I'm
wrong). So without having the database attached to the SQL server, I
will not manage to remove the duplicate rows. But when I tried to
attach, it checks for duplicate records automatically and fail to
attach.
Is there any workaround for my case?
Thanks in advance.
Regards,
Garreth GohBTW, it is SQL 2000 with SP3.
Regards,
Garreth Goh
On Dec 18, 10:02 am, gohtiamt...@.gmail.com wrote:
> Hello all,
> I have been trying to attach a database but it fails because of
> duplicate rows (Error 2627).
> I searched in the Internet for removing duplicate records but it can
> only work if I manage to attach the database first (correct me if I'm
> wrong). So without having the database attached to the SQL server, I
> will not manage to remove the duplicate rows. But when I tried to
> attach, it checks for duplicate records automatically and fail to
> attach.
> Is there any workaround for my case?
> Thanks in advance.
> Regards,
> Garreth Goh|||Hi,
More updates after several attempts (with separate SQL server 2000
SP4).
01. I move the MDF and LDF files to another folders. I have two MDF
and two LDF files for one database.
02. I attach the same but blank backup database to my SQL server with
a new database name.
03. Back it up.
04. Restore the backup with the original database name in the initial
folder where the corrupted files were.
05. Detach the new restored (but empty) database.
06. Move the new created MDF and LDF files to another folder.
07. Copy the original corrupted MDF and LDF files back to the original
folder.
08. Attach the database. Got "Suspect" message.
09. Update "sysdatabases" to set the database into Emergency Mode.
10. Attach the database back. I got Emergency Mode.
11. Run "DBCC CHECKDB WITH NO_INFOMSGS" tells me to do
"REPAIR_ALLOW_DATA_LOSS".
12. Stop SQL services and run in Command Prompt "SQLSERVR -c -m" cause
it tells me to have Single-User mode when trying to run "DBCC
CHECKDB ...REPAIR_ALLOW_DATA_LOSS".
13. When I try to run "DBCC CHECKDB ...REPAIR_ALLOW_DATA_LOSS" in
this Single-Mode, it tells me "Could not run BEGIN TRANSACTION in
database 'MyDB' because the database is in bypass recovery mode."
I am stuck here. Could anyone here help, please?
I may have incorrectly listed down the sequence from point 8 to 11 but
my current status is at point 13.
Regards,
Garreth Goh
On Dec 18, 10:58 am, gohtiamt...@.gmail.com wrote:
> BTW, it is SQL 2000 with SP3.
> Regards,
> Garreth Goh|||The error pretty much speak for itself. My guess is that you have to try to export the data to a
clean database, using some combination of script objects (unless you have DDL files to re-create
them) and for the data SELECT INTO., INSERT SELECT, BCP etc.
I would bring in an expert if above doesn't feel comfortable to you...
--
Tibor Karaszi, SQL Server MVP
http://www.karaszi.com/sqlserver/default.asp
http://sqlblog.com/blogs/tibor_karaszi
<gohtiamtjai@.gmail.com> wrote in message
news:078e33bc-1d03-4d24-a65b-96367d382dde@.a35g2000prf.googlegroups.com...
> Hi,
> More updates after several attempts (with separate SQL server 2000
> SP4).
> 01. I move the MDF and LDF files to another folders. I have two MDF
> and two LDF files for one database.
> 02. I attach the same but blank backup database to my SQL server with
> a new database name.
> 03. Back it up.
> 04. Restore the backup with the original database name in the initial
> folder where the corrupted files were.
> 05. Detach the new restored (but empty) database.
> 06. Move the new created MDF and LDF files to another folder.
> 07. Copy the original corrupted MDF and LDF files back to the original
> folder.
> 08. Attach the database. Got "Suspect" message.
> 09. Update "sysdatabases" to set the database into Emergency Mode.
> 10. Attach the database back. I got Emergency Mode.
> 11. Run "DBCC CHECKDB WITH NO_INFOMSGS" tells me to do
> "REPAIR_ALLOW_DATA_LOSS".
> 12. Stop SQL services and run in Command Prompt "SQLSERVR -c -m" cause
> it tells me to have Single-User mode when trying to run "DBCC
> CHECKDB ...REPAIR_ALLOW_DATA_LOSS".
> 13. When I try to run "DBCC CHECKDB ...REPAIR_ALLOW_DATA_LOSS" in
> this Single-Mode, it tells me "Could not run BEGIN TRANSACTION in
> database 'MyDB' because the database is in bypass recovery mode."
> I am stuck here. Could anyone here help, please?
> I may have incorrectly listed down the sequence from point 8 to 11 but
> my current status is at point 13.
>
> Regards,
> Garreth Goh
>
> On Dec 18, 10:58 am, gohtiamt...@.gmail.com wrote:
>> BTW, it is SQL 2000 with SP3.
>> Regards,
>> Garreth Goh|||Or get Microsoft Technical Support on the phone.
--
Kevin G. Boles
TheSQLGuru
Indicium Resources, Inc.
kgboles a earthlink dt net
"Tibor Karaszi" <tibor_please.no.email_karaszi@.hotmail.nomail.com> wrote in
message news:261F6FD2-B073-42F2-A218-B3B6AFE3750D@.microsoft.com...
> The error pretty much speak for itself. My guess is that you have to try
> to export the data to a clean database, using some combination of script
> objects (unless you have DDL files to re-create them) and for the data
> SELECT INTO., INSERT SELECT, BCP etc.
> I would bring in an expert if above doesn't feel comfortable to you...
> --
> Tibor Karaszi, SQL Server MVP
> http://www.karaszi.com/sqlserver/default.asp
> http://sqlblog.com/blogs/tibor_karaszi
>
> <gohtiamtjai@.gmail.com> wrote in message
> news:078e33bc-1d03-4d24-a65b-96367d382dde@.a35g2000prf.googlegroups.com...
>> Hi,
>> More updates after several attempts (with separate SQL server 2000
>> SP4).
>> 01. I move the MDF and LDF files to another folders. I have two MDF
>> and two LDF files for one database.
>> 02. I attach the same but blank backup database to my SQL server with
>> a new database name.
>> 03. Back it up.
>> 04. Restore the backup with the original database name in the initial
>> folder where the corrupted files were.
>> 05. Detach the new restored (but empty) database.
>> 06. Move the new created MDF and LDF files to another folder.
>> 07. Copy the original corrupted MDF and LDF files back to the original
>> folder.
>> 08. Attach the database. Got "Suspect" message.
>> 09. Update "sysdatabases" to set the database into Emergency Mode.
>> 10. Attach the database back. I got Emergency Mode.
>> 11. Run "DBCC CHECKDB WITH NO_INFOMSGS" tells me to do
>> "REPAIR_ALLOW_DATA_LOSS".
>> 12. Stop SQL services and run in Command Prompt "SQLSERVR -c -m" cause
>> it tells me to have Single-User mode when trying to run "DBCC
>> CHECKDB ...REPAIR_ALLOW_DATA_LOSS".
>> 13. When I try to run "DBCC CHECKDB ...REPAIR_ALLOW_DATA_LOSS" in
>> this Single-Mode, it tells me "Could not run BEGIN TRANSACTION in
>> database 'MyDB' because the database is in bypass recovery mode."
>> I am stuck here. Could anyone here help, please?
>> I may have incorrectly listed down the sequence from point 8 to 11 but
>> my current status is at point 13.
>>
>> Regards,
>> Garreth Goh
>>
>> On Dec 18, 10:58 am, gohtiamt...@.gmail.com wrote:
>> BTW, it is SQL 2000 with SP3.
>> Regards,
>> Garreth Goh
>